-
Plating process, how to choose hang - up, plating, continuous plating and brush plating?
发布时间:2016/7/11 16:57:08 | 信息来源:Huizhou jia will electroplating technology co., LTDElectroplating is use the principle of electrolysis in some metal surface plating on a thin layer of metal or alloy, using electrolysis to the surface of metal or other material parts attached to a layer of metal film process so as to prevent corrosion, improve wear resistance, electrical conductivity, reflective and enhance the appearance effect. Electroplating is divided into hanging, rolling, continuous plating and brush plating, etc., mainly related to the size and volume of the parts to be plated.
Application objects of hanging, rolling, continuous plating and brush plating:
Hanging plating is the workpiece is clamped on the hanger, suitable for large parts, each batch to plating of small number of products, coating thickness more than 10 m process. Such as car bumpers, bicycle handlebars etc.. Hanging plating production line can be divided into manual line, automatic line.
Continuous plating suitable for mass production of wire and strip.
The brush plating is suitable for partial plating or repair.
Roll plating is usually applied to small parts. Barrel plating strictly speaking called barrel plating, he is will be a certain number of small parts are placed in a special drum, under rolling state indirect manner conductive to parts deposition on the surface of all kinds of metal or alloy coating, to reach the surface protection decoration and all kinds of function of an electroplating processing. According to the different drum, the common rolling process in electroplating production is divided into three types: horizontal rolling, tilting, rolling and vibration rolling.
上一篇:无信息